Free shipping to the United States (US) from $100

Tiny Treehouse Assembly Guide

Do you prefer a step by step guide?

Before You Begin

Here’s what you’ll need to assemble your Tiny Treehouse:

Cutting board – Protects your table or workspace when cutting out the elements.

Something straight with an edge (like a paint mixing stick) – Helps make folding easier and ensures sharp, clean folds.

Scissors – For cutting connection points.

Knife – Useful for cutting precise connection points.

Tweezers (optional but helpful) – Makes handling small pieces easier.

⚠️ Important Notes Before Starting:

Bending the metal back and forth too much will break it. Follow the assembly order to avoid unnecessary bending.

Watch out for sharp edges. Some cut corners of the metal may be sharp, so handle with care.

Tiny birdhouse Don't break it
Tiny treehouse Use a knife to cut connection points

Step 1: Pop Out All the Elements

All elements are pre-cut from a brass sheet. To remove them:

Push firmly on the connection points to release the pieces.

For smaller elements, use scissors or a knife to cut the connection points—this is often easier than pushing them out with your fingers.

Step 2: Build the Walls

✨ Start by building the walls of the Tiny Treehouse, and use the edge of something straight to help fold the walls neatly.

✨ Align the fold lines and press firmly to create a sharp 90-degree angle.

✨ Repeat this on all sides until the walls form a square shape.

Don’t fold the roof yet! We’ll get to that later.

Tiny treehouse Fold the walls
Tiny treehouse Fold the bottom by Botanopia

Step 3: Fold the Base

✨ Begin with the large tabs, folding them at a 45° angle. Then, fold the smaller tabs.

✨ Use a straight edge to keep the folds crisp and precise.

✨ Repeat on all four sides.

Step 4: Attach the Ties

✨ Gently bend the long ties and insert them into the top and bottom slits at the back of the treehouse.

✨ These ties will allow you to secure your treehouse to a branch later.

Tiny treehouse insert tie at the back

Step 5: Attach the Base to the Walls

✨ Align the tabs on the base with the corresponding slits on the walls.
✨ Insert the tabs and bend the base slightly downward so it forms a 90-degree angle and fits snugly to the bottom of the house.
Fold the tabs on the inside to lock everything securely in place.
Repeat on all four sides.

Tiny treehouse Insert base to the house
Tiny treehouse base to house side
Tiny treehouse fold little tabs on the inside

Step 6: Assemble the Roof

✨ Use the edge of something straight to help fold the roof neatly.

Press down gently with your fingers to create a sharp fold.

✨ Insert the roof tab into the slit and bend it upwards to secure the roof in place.

Tiny treehouse Fold the roof
Tiny treehouse push out all the details
Tiny treehouse Fold flower and window sill
Tiny treehouse fold the ladder down

Step 7: Add the Tiny Details

Unfold the shutters and window sills using tweezers.

✨ Free the flower using tweezers or scissors, fold the sill downward and the flower upward.

✨ Free the ladder and fold it downward.

✨ Optional: Open the long legs at the base for an alternate display.

Step 8: Assemble the Rope Ladder

✨ Cut out all the rungs of the ladder, and cut the rope into two equal pieces.

✨ Tie small knots at the bottom of each rope, about 1–1.5 cm from the end.

✨ Thread the rope through the small holes in each rung

✨ Continue tying knots and adding rungs until the ladder is complete.

Match the knots on both sides for the best result!

Tiny treehouse little knots ladder
Tiny treehouse thread the ladder on
Tiny treehouse Finished ladder

Step 9: Assemble the Swing

Fold the seat panel in half and bend the side tabs upwards to form the seat.

✨ Take the swing bar and slide the small tab through the slit in the round piece.

✨ When the T-shaped end hits the round piece, it’s in place—fold it slightly to ensure it stays straight.

✨ Thread the small tab on the swing bar through the slit on the side of the seat and bend the tab upwards to secure it.

✨ Repeat this process on the other side to complete the swing.

Tiny treehouse fold swing flat + sides up
Tiny treehouse tie true circel + bend and the end
Tiny treehouse Fold the little tabs

Step 11: Time to Set Up Your Tiny Treehouse!

✨ Place the treehouse in the potting soil or secure it to a branch with the tie.

✨ Hang the swing and ladder on different branches to complete the scene.

✨ Add all the little friends and bring your magical treehouse world to life!

It looks like you're shopping from United States (US)... are these settings correct?

Language
Currency
 
Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below.