Bolty – Hanging planter system for plant pots

Hurray, you’ve found a way to transform any flower pot into a hanging planter! Bolty is a very discreet, smart hanging system that will help you raise your plants to the sky elegantly. 

To use Bolty, all you need is a pot with a flat bottom and a drainage hole of 25mm ø max. Stick the stem through the drainage hole and fasten the bolt to help the system clamp down on either side of the pot. A rubber ring ensures a waterproof seal. Bolty is made of stainless steel, so it won’t rust.

When preparing your pots, you can simply push the plant down over the stem in the middle to keep your greens securely in place. Spread the leaves over the edge to distribute the weight evenly, and you’re ready to hang your finished work from a hook or rope (not included). Enjoy your magical plant waterfall.

Good to know: Bolty’s stem is 24cm tall, allowing you to combine with a variety of pot sizes.

EAN: 613310875789

AU$17,83

Complete your setup, combine and get 50% discount on these:

Set of 2 steel S-hooks to hang up your plants

We'll get your plants hooked on heights!

If you're hanging up your plants, you'll probably need one of these little S-shaped hooks. Whether you're using our Bolty hanging screw or another system of your own choosing, the hooks make it easy to connect to a piece of rope, chain, or ceiling hook, to easily remove your pot when needed.

The set of 2 steel S-hooks are made of galvanized steel wire, with a diameter of 4 mm. The total height of each hook is 45mm (1,77 in) which makes it a perfect fit for the top ring of our Bolty.

 

Complete your setup, combine and get 50% discount on these:

Set of 2 steel S-hooks to hang up your plants

We'll get your plants hooked on heights!

If you're hanging up your plants, you'll probably need one of these little S-shaped hooks. Whether you're using our Bolty hanging screw or another system of your own choosing, the hooks make it easy to connect to a piece of rope, chain, or ceiling hook, to easily remove your pot when needed.

The set of 2 steel S-hooks are made of galvanized steel wire, with a diameter of 4 mm. The total height of each hook is 45mm (1,77 in) which makes it a perfect fit for the top ring of our Bolty.

 

Description

Hanging system for plant pots

Bolty is a modern and discreet way to suspend your hanging plants up high. Often plant hangers are highly visible, cradling your pot from the outside. Since Bolty is in the middle of the pot, it’s barely visible. It will leave visitors wondering how you created your beautiful minimalist hanging garden.

Stylish indoor hanging planter

We know macramé plant hangers are back in style, but the boho look may not be your preferred style. Bolty allows you to upgrade the plant pots you already love to a suitable home for your hanging plants. Having the same style pots is a smart move if you want to create unity in your space and keep the spotlight on the plants.

Features of our Bolty hanging system

  • – Minimalistic. Born to be a macramé alternative.
  • – Decorative. Give your plants the centre stage.
  • – Easy to assemble. Watch our video tutorial for a quick demo (in the video tab).
  • – Durable stainless steel, suitable for indoor & outdoor use.
  • – Waterproof seal, no need to fear leaks on your floors.

Additional information

Volumetric Weight 110 g
Dimensions 21 × 3,5 × 3,5 cm
Color

golden, Stainless steel

Country of Origin

Slovenia

Brand

Botanopia

13 reviews for Bolty – Hanging planter system for plant pots

  1. American

    Blake B. (verified owner)

    Really minimalistic and clean! works great to display my plants in my shop!

  2. American

    Catherine (verified owner)

    J’ai toujours voulu avoir plein des plantes suspendues chez moi je trouve ça tellement beau! Avec le Bolty c’est super simple et le résultat est encore mieux que ce que j’espérais

  3. American

    Kiran Jones (verified owner)

    A little difficult to mount, maybe an instructional video would be helpful! Once i got it working it looks great though!

  4. American

    Corinna Kern (verified owner)

    Der Bolty ist in meiner Calathea kaum sichtbar. Als würde sie in der Luft schweben. Sehr schön!

  5. American

    Shay Lee (verified owner)

    Tried this with a very heavy pot and unfortunately didn’t really work. Does work wonders with my smaller pots! My husband keeps bumping his head on them though…haha!

  6. American

    Christopher L. (verified owner)

    Dit is toch zo slim bedacht? Ik heb er 5 gekocht om een leuke plantenhoek te creeren. Ik heb geen ruimte op de grond maar wel plek zat om planten te hangen vanaf het plafond. Eenmal opgehangen zie je de schroef bijna niet, alle andacht gaat naar de planten zoals het hoort. Erg blij mee.

  7. American

    Silke (verified owner)

    Schade, dass man einen Topf mit Loch dafür braucht. Bin kein Fan von Terracotta Töpfen und würde gerne meine ‘schönen’ Blumentöpfe aufhängen. Die Idee ist aber gut.

  8. American

    Isabel Murray (verified owner)

    Love It!!!

  9. American

    Claudine (verified owner)

    Très simple à installer dans le pot.

  10. American

    Paula Saber (verified owner)

    Sehr clever! Bin begeistert!!

  11. American

    Jade L. (verified owner)

    La vis est très intelligente et très bien emballée.

  12. American

    Yasmina Keijser (verified owner)

    Ik heb mijn bestelling goed ontvangen, erg mooi ingepakt en verzorgd tot in de puntjes bedankt. De bolty moet ik nog in mijn pot installeren.

  13. American

    Marek (verified owner)

    Ich habe mir den Bolty vor circa einem Jahr zugelegt. Mittlerweile ist die Schraube an der Unterseite etwas verrostet, weshalb sich diese nicht mehr gut lösen lässt. Optisch aber echt klasse. 👍

Only logged in customers who have purchased this product may leave a review.

Bolty hanging screw for plant pots

The Bolty hanging screw is compatible with any pot that has a drainage hole of 25mm ø maximum. If your pot doesn't have a hole yet, you can also consider drilling one yourself. The total length of the screw is 24 cm, we recommend you use for pots that are maximum 22cm tall, so the hanging loop doesn't end up buried underneath the soil surface.

The steel Bolty is very tough and has been tested to carry up to 40kgs.

However, it's very very important that you hang it from a hook that can also handle the weight of your pots, and choose a suitable rope or chain to hang it from.

Yes, Bolty is perfect indoors and outdoors. It's made of stainless steel, so it won't rust.

No problem, you can just push your plant on the screw. Sounds scary, but it will be just fine. Here's a little installation video to show you how:

Yes, we recommend using an S hook in the hanging hole of your Bolty, so you can easily take it on and off for watering or other plant maintenance. For example, we like to give our hanging plants a good shower once in a while, to dust them off and ward off any pests issues.

You may also like…