Tiny Treehouse Assembly Guide

Do you prefer a step by step guide?

Table of Contents show the contents

Before You Begin

Here’s what you’ll need to assemble your Tiny Treehouse:

✅ Cutting board – Protects your table or workspace when cutting out the elements.

✅ Something straight with an edge (like a paint mixing stick) – Helps make folding easier and ensures sharp, clean folds.

✅ Scissors – For cutting connection points.

✅ Knife – Useful for cutting precise connection points.

✅ Tweezers (optional but helpful) – Makes handling small pieces easier.

⚠️ Important Notes Before Starting:

Bending the metal back and forth too much will break it. Follow the assembly order to avoid unnecessary bending.

Watch out for sharp edges. Some cut corners of the metal may be sharp, so handle with care.

Tiny treehouse Use a knife to cut connection points

Step 1: Pop Out All the Elements

All elements are pre-cut from a brass sheet. To remove them:

✨ Push firmly on the connection points to release the pieces.

✨ For smaller elements, use scissors or a knife to cut the connection points—this is often easier than pushing them out with your fingers.

Step 2: Build the Walls

✨ Start by building the walls of the Tiny Treehouse, and use the edge of something straight to help fold the walls neatly.

✨ Align the fold lines and press firmly to create a sharp 90-degree angle.

✨ Repeat this on all sides until the walls form a square shape.

✨ Don’t fold the roof yet! We’ll get to that later.

Step 3: Fold the Base

✨ Begin with the large tabs, folding them at a 45° angle. Then, fold the smaller tabs.

✨ Use a straight edge to keep the folds crisp and precise.

✨ Repeat on all four sides.

Step 4: Attach the Ties

✨ Gently bend the long ties and insert them into the top and bottom slits at the back of the treehouse.

✨ These ties will allow you to secure your treehouse to a branch later.

Step 5: Attach the Base to the Walls

✨ Align the tabs on the base with the corresponding slits on the walls.
✨ Insert the tabs and bend the base slightly downward so it forms a 90-degree angle and fits snugly to the bottom of the house.
✨ Fold the tabs on the inside to lock everything securely in place.
✨ Repeat on all four sides.