Bolty – Hanging planter system for plant pots

Hurray, you’ve found a way to transform any flower pot into a hanging planter! Bolty is a very discreet, smart hanging system that will help you raise your plants to the sky elegantly. 

To use Bolty, all you need is a pot with a flat bottom and a drainage hole of 25mm ø max. Stick the stem through the drainage hole and fasten the bolt to help the system clamp down on either side of the pot. A rubber ring ensures a waterproof seal. Bolty is made of stainless steel, so it won’t rust. 

When preparing your pots, you can simply push the plant down over the stem in the middle to keep your greens securely in place. Spread the leaves over the edge to distribute the weight evenly, and you’re ready to hang your finished work from a hook or rope (not included). Enjoy your magical plant waterfall.

Good to know: Bolty’s stem is 24cm tall, allowing you to combine with a variety of pot sizes. 

Ordering this as a gift ? We’ve got a free gift label option or a premium wrapping option for you.

EAN: 613310875789

15,49

Clear

Create your own green wall , combine and get 10% discount on these

Clippy - Wall mounting kit for 5 plant pots

Clippy is our wall mounting kit that will help you create the plant wall of your dreams. Use the set of 5 metal clips to decorate your walls, small balcony or other narrow spaces with plant pots. Your walls will never look boring again. 

Clippy is easy to use. Screw the clip into the wall with the mounting screws (included) and slide your pot onto it. You’ll need a pot with a rim to do so, most classic terracotta pots have one. Clippy is designed to hold pots with a diameter of 18 to 22 cm. 

Watch our Clippy video tutorial (in the video tab) for some pointers on attaching your metal wall planter set to different surfaces like wood, plaster or concrete. Also included in the Clippy set: cork plugs to seal your drainage holes when using the wall mounting kit for indoor pots. The cork plugs are suitable for drainage holes with a diameter of ø 17 to 22 mm.

Once mounted, your pots might be slightly tilted forward, so take a moment to check if Clippy is gripping the rim as needed. Adjusting the size is easy: simply use pliers to squeeze the ends of the clip closer together to make it grip a thinner rim. 

Ordering this as a gift ? We’ve got a free gift label option or a premium wrapping option for you.

Gold Brass Chain - Plant Support for climbing plants

This gold brass chain was designed as a plant support for climbing plants. A uniquely stylish plant accessory for your modern home, here to lend your climbers a helping hand. 

 

We designed this golden plant support when we couldn’t find one that suited the style of our home. It’s shipped in chic packaging, flat-packed (mailbox proof!) and ready to be assembled to your liking - reaching up to 1m90 high. Create two smaller chains or hang your chain upside down, it’s up to you to work this new item into your home design.

 

The plant support is made of brass, making it lightweight enough to be pinned to the wall with a push pin. Easily ready for your plant friend to climb! Of course, fastening it with a simple nail or screw is possible too. The chain is fit for indoor and outdoor use thanks to its protective coating.

 

Ordering this as a gift ? We’ve got a free gift label option or a premium wrapping option for you.

Create your own green wall , combine and get 10% discount on these

Clippy - Wall mounting kit for 5 plant pots

Clippy is our wall mounting kit that will help you create the plant wall of your dreams. Use the set of 5 metal clips to decorate your walls, small balcony or other narrow spaces with plant pots. Your walls will never look boring again. 

Clippy is easy to use. Screw the clip into the wall with the mounting screws (included) and slide your pot onto it. You’ll need a pot with a rim to do so, most classic terracotta pots have one. Clippy is designed to hold pots with a diameter of 18 to 22 cm. 

Watch our Clippy video tutorial (in the video tab) for some pointers on attaching your metal wall planter set to different surfaces like wood, plaster or concrete. Also included in the Clippy set: cork plugs to seal your drainage holes when using the wall mounting kit for indoor pots. The cork plugs are suitable for drainage holes with a diameter of ø 17 to 22 mm.

Once mounted, your pots might be slightly tilted forward, so take a moment to check if Clippy is gripping the rim as needed. Adjusting the size is easy: simply use pliers to squeeze the ends of the clip closer together to make it grip a thinner rim. 

Ordering this as a gift ? We’ve got a free gift label option or a premium wrapping option for you.

Gold Brass Chain - Plant Support for climbing plants

This gold brass chain was designed as a plant support for climbing plants. A uniquely stylish plant accessory for your modern home, here to lend your climbers a helping hand. 

 

We designed this golden plant support when we couldn’t find one that suited the style of our home. It’s shipped in chic packaging, flat-packed (mailbox proof!) and ready to be assembled to your liking - reaching up to 1m90 high. Create two smaller chains or hang your chain upside down, it’s up to you to work this new item into your home design.

 

The plant support is made of brass, making it lightweight enough to be pinned to the wall with a push pin. Easily ready for your plant friend to climb! Of course, fastening it with a simple nail or screw is possible too. The chain is fit for indoor and outdoor use thanks to its protective coating.

 

Ordering this as a gift ? We’ve got a free gift label option or a premium wrapping option for you.

Description

Hanging system for plant pots

Bolty is a modern and discreet way to suspend your hanging plants up high. Often plant hangers are highly visible, cradling your pot from the outside. Since Bolty is in the middle of the pot, it’s barely visible. It will leave visitors wondering how you created your beautiful minimalist hanging garden.

Stylish indoor hanging planter 

We know macramé plant hangers are back in style, but the boho look may not be your preferred style. Bolty allows you to upgrade the plant pots you already love to a suitable home for your hanging plants. Having the same style pots is a smart move if you want to create unity in your space and keep the spotlight on the plants. 

Features of our Bolty hanging system

  • – Minimalistic. Born to be a macramé alternative. 
  • – Decorative. Give your plants the centre stage. 
  • – Easy to assemble. Watch our video tutorial for a quick demo (in the video tab). 
  • – Durable stainless steel, suitable for indoor & outdoor use.
  • – Waterproof seal, no need to fear leaks on your floors.

Additional information

Weight 110 g
Dimensions 21 × 3.5 × 3.5 cm
Color

golden, Stainless steel

Country of Origin

Slovenia

Brand

Botanopia

Product Video

13 reviews for Bolty – Hanging planter system for plant pots

  1. Blake B. (verified owner)

    Really minimalistic and clean! works great to display my plants in my shop!

  2. Catherine (verified owner)

    J’ai toujours voulu avoir plein des plantes suspendues chez moi je trouve ça tellement beau! Avec le Bolty c’est super simple et le résultat est encore mieux que ce que j’espérais

  3. Kiran Jones (verified owner)

    A little difficult to mount, maybe an instructional video would be helpful! Once i got it working it looks great though!

  4. Corinna Kern (verified owner)

    Der Bolty ist in meiner Calathea kaum sichtbar. Als würde sie in der Luft schweben. Sehr schön!

  5. Shay Lee (verified owner)

    Tried this with a very heavy pot and unfortunately didn’t really work. Does work wonders with my smaller pots! My husband keeps bumping his head on them though…haha!

  6. Christopher L. (verified owner)

    Dit is toch zo slim bedacht? Ik heb er 5 gekocht om een leuke plantenhoek te creeren. Ik heb geen ruimte op de grond maar wel plek zat om planten te hangen vanaf het plafond. Eenmal opgehangen zie je de schroef bijna niet, alle andacht gaat naar de planten zoals het hoort. Erg blij mee.

  7. Silke (verified owner)

    Schade, dass man einen Topf mit Loch dafür braucht. Bin kein Fan von Terracotta Töpfen und würde gerne meine ‘schönen’ Blumentöpfe aufhängen. Die Idee ist aber gut.

  8. Isabel Murray (verified owner)

    Love It!!!

  9. Claudine (verified owner)

    Très simple à installer dans le pot.

  10. Paula Saber (verified owner)

    Sehr clever! Bin begeistert!!

  11. Jade L. (verified owner)

    La vis est très intelligente et très bien emballée.

  12. Yasmina Keijser (verified owner)

    Ik heb mijn bestelling goed ontvangen, erg mooi ingepakt en verzorgd tot in de puntjes bedankt. De bolty moet ik nog in mijn pot installeren.

  13. Marek (verified owner)

    Ich habe mir den Bolty vor circa einem Jahr zugelegt. Mittlerweile ist die Schraube an der Unterseite etwas verrostet, weshalb sich diese nicht mehr gut lösen lässt. Optisch aber echt klasse. 👍

Only logged in customers who have purchased this product may leave a review.